-40%
Cisco A9K-MOD160-TR ASR 9000 Mod160 Modular Line Card Packet Transport Optimized
$ 1224.95
- Description
- Size Guide
Description
CISCOA9K-MOD160-TR NO BOXTEST DOC:
RP/0/RSP0/CPU0:ios#sh invent | include PID Fri Apr 19 18:29:00.671 UTC PID: A9K-RSP440-TR, VID: V02, SN: FOC1717N14V PID: A9K-MOD160-TR, VID: V05, SN: FOC1742N4BG PID: A9K-MPA-20X1GE, VID: V02, SN: FOC1744N6Q6 RP/0/RSP0/CPU0:ios# RP/0/RSP0/CPU0:ios#sh ver br Fri Apr 19 18:29:06.034 UTC Cisco IOS XR Software, Version 6.2.3[Default] Copyright (c) 2017 by Cisco Systems, Inc. ROM: System Bootstrap, Version 0.76(c) 1994-2012 by Cisco Systems, Inc. ios uptime is 9 minutes System image file is "disk0:asr9k-os-mbi-6.2.3/0x100305/mbiasr9k-rsp3.vm" cisco ASR9K Series (Intel 686 F6M14S4) processor with 6291456K bytes of memory. Intel 686 F6M14S4 processor at 2128MHz, Revision 2.174 ASR 9010 8 Line Card Slot Chassis with V1 AC PEM 2 Management Ethernet 1 FastEthernet 20 GigabitEthernet 503k bytes of non-volatile configuration memory. 6271M bytes of hard disk. 11817968k bytes of disk0: (Sector size 512 bytes). 11817968k bytes of disk1: (Sector size 512 bytes). RP/0/RSP0/CPU0:ios# RP/0/RSP0/CPU0:ios#sh plat Fri Apr 19 18:26:33.840 UTC Node Type State Config State ----------------------------------------------------------------------------- 0/RSP0/CPU0 A9K-RSP440-TR(Active) IOS XR RUN PWR,NSHUT,MON 0/0/CPU0 A9K-MOD160-TR IOS XR RUN PWR,NSHUT,MON 0/0/0 A9K-MPA-20X1GE OK PWR,NSHUT,MON RP/0/RSP0/CPU0:ios# RP/0/RSP0/CPU0:ios#sh plat sum loc all Fri Apr 19 18:26:33.985 UTC ------------------------------------------------------------------------------- Platform Node : 0/RSP0/CPU0 (slot 4) PID : A9K-RSP440-TR Card Type : ASR9K Fabric, Controller, 6G memory VID/SN : V02 / FOC1717N14V Oper State : IOS XR RUN Last Reset : User Initiated reload Process: reload : Fri Apr 19 18:17:55 2019 UTC Configuration : Power is enabled Bootup enabled. Monitoring enabled Rommon Ver : Version 0.76 IOS SW Ver : 6.2.3 Main Power : Power state Enabled. Estimate power 350 Watts of power required. Faults : N/A ------------------------------------------------------------------------------- Platform Node : 0/0/CPU0 (slot 0) PID : A9K-MOD160-TR Card Type : MOD160 Modular Linecard, Packet Transport Optimized VID/SN : V05 / FOC1742N4BG Oper State : IOS XR RUN Last Reset : Card reset requested by: Process ID: 45089 (lda_server), Target node: 0/0/CPU0, CondID: 4006 : Fri Apr 19 18:18:37 2019 UTC Configuration : Power is enabled Bootup enabled. Monitoring enabled Rommon Ver : Version 3.3(20150930:043930) IOS SW Ver : 6.2.3 Main Power : Power state Enabled. Estimate power 590 Watts of power required. Faults : N/A ------------------------------------------------------------------------------- Platform Node : 0/0/0 (slot 0, bay 0) PID : A9K-MPA-20X1GE Card Type : ASR 9000 20-port 1GE Modular Port Adapter VID/SN : V02 / FOC1744N6Q6 Oper State : OK Last Reset : Fri Apr 19 18:24:18 2019 Up Time : 00:02:17 Configuration : Power is enabled Bootup enabled Monitoring enabled FPD SW Rev(s) : ------------------------------------------------------------------------------- RP/0/RSP0/CPU0:ios# RP/0/RSP0/CPU0:ios#sh diag d Fri Apr 19 18:26:51.737 UTC NODE module 0/RSP0/CPU0 ASR9K Route Switch Processor with 440G/slot Fabric and 6GB MAIN: board type 0x100306 S/N: FOC1717N14V Top Assy. Number: 68-3938-05 PID: A9K-RSP440-TR HwRev (UDI_VID): V02 Chip HwRev: V1.100 New Deviation Number: 0 CLEI: IPUCA6VBTB Board State : IOS XR RUN PLD: Motherboard: N/A, Processor version: 0x0 (rev: 2.174), Power: N/A MONLIB: ROMMON: Version 0.76 [ASR9K x86 ROMMON], CPU0: Intel 686 F6M14S4 Board FPGA/CPLD/ASIC Hardware Revision: FabSwitch0 : V1.5 FabSwitch1 : V1.5 FabArbiter : V0.1 FIA : V0.2 IntCtrl : V0.11 ClkCtrl : V2.10 10GPuntFPGA : V1.10 HD : V17.0 USB0 : V17.0 USB1 : V0.0 CpuCtrl : V0.11 YDTI : V4.9 LIU : V0.0 MLANSwitch : V0.0 EOBCSwitch : V0.0 HostInftCtrl : V0.0 PHY : V0.0 Offload10GE : V0.0 E10GEDualMAC0 : V0.0 E10GEDualMAC1 : V0.0 EGEDualMAC0 : V0.0 EGEDualMAC1 : V0.0 CBC (active partition) : v16.116 CBC (inactive partition) : v16.115 NODE module 0/0/CPU0 160G Modular Linecard, Packet Transport Optimized MAIN: board type 0x2a0254 S/N: FOC1742N4BG Top Assy. Number: 68-4328-08 PCA: 73-14291-07 PID: A9K-MOD160-TR HwRev (UDI_VID): V05 Chip HwRev: V1.102 New Deviation Number: -120 CLEI: IPUIBUYRAB Board State : IOS XR RUN PLD: Motherboard: N/A, Processor version: 0x2380 (rev: 0.0), Power: N/A ROMMON: Version 3.3(20150930:043930) [ASR9K ROMMON] CPU0: P4040 Board FPGA/CPLD/ASIC Hardware Revision: NP0 : V4.194 NP1 : V4.194 NP2 : V0.0 NP3 : V0.0 FIA0 : V0.2 FIA1 : V0.2 FIA2 : V0.0 FIA3 : V0.0 X-Bar : V1.5 CPUCtrl : V0.0 Arbiter : V0.2 USB : V17.0 ClkCtrl : V0.0 DBCtrl : V0.0 Modular Linecard Daughter board : V1.102 CBC (active partition) : v20.118 CBC (inactive partition) : v20.117 MPA 0/0/0 : ASR 9000 20-port 1GE Modular Port Adapter MAIN: board type 0235 68-3959-06 rev A0 dev 371130880 S/N FOC1744N6Q6 PCA: 73-13152-04 rev N/A PID: A9K-MPA-20X1GE VID: V02 CLEI: IPUIBVTRAA Board State : OK FPD Software Revision: RP/0/RSP0/CPU0:ios# RP/0/RSP0/CPU0:ios#admin Fri Apr 19 18:26:52.293 UTC RP/0/RSP0/CPU0:ios(admin)# RP/0/RSP0/CPU0:ios(admin)#sh hw-mod fpd loc all Fri Apr 19 18:26:52.351 UTC ===================================== ========================================== Existing Field Programmable Devices ========================================== HW Current SW Upg/ Location Card Type Version Type Subtype Inst Version Dng? ============ ======================== ======= ==== ======= ==== =========== ==== 0/RSP0/CPU0 A9K-RSP440-TR 1.0 lc cbc 0 16.116 No lc fpga1 0 0.11 No lc fpga2 0 1.10 No lc fpga3 0 4.09 No lc rommon 0 0.76 No -------------------------------------------------------------------------------- 0/FT0/SP ASR-9010-FAN-V2 1.0 ft cbc 7 29.12 No -------------------------------------------------------------------------------- 0/FT1/SP ASR-9010-FAN-V2 1.0 ft cbc 8 29.12 No -------------------------------------------------------------------------------- 0/0/CPU0 A9K-MOD160-TR 1.0 lc cbc 0 20.118 No lc fpga2 0 1.04 No lc fpga4 0 1.05 No lc rommon 0 3.03 No -------------------------------------------------------------------------------- 0/0/0 A9K-MPA-20X1GE 1.102 spa fpga3 0 1.01 No -------------------------------------------------------------------------------- RP/0/RSP0/CPU0:ios(admin)# RP/0/RSP0/CPU0:ios(admin)#sh diagno res loc 0/0/CPU0 Fri Apr 19 18:26:54.427 UTC Current bootup diagnostic level for A9K-MOD160-TR 0/0/CPU0: bypass A9K-MOD160-TR 0/0/CPU0: Overall diagnostic result: PASS Diagnostic level at card bootup: bypass Test results: (. = Pass, F = Fail, U = Untested) 1 ) CPUCtrlScratchRegister ----------> . 2 ) DBCtrlScratchRegister -----------> . 3 ) FIAScratchRegister --------------> . 4 ) LcEobcHeartbeat -----------------> . 5 ) NPULoopback ---------------------> U RP/0/RSP0/CPU0:ios(admin)# RP/0/RSP0/CPU0:ios(admin)#exit RP/0/RSP0/CPU0:ios# RP/0/RSP0/CPU0:ios#sh ip int br Fri Apr 19 18:27:16.292 UTC Interface IP-Address Status Protocol Vrf-Name MgmtEth0/RSP0/CPU0/0 unassigned Down Down default PTP0/RSP0/CPU0/0 unassigned Down Down default MgmtEth0/RSP0/CPU0/1 unassigned Down Down default GigabitEthernet0/0/0/0 unassigned Up Up default GigabitEthernet0/0/0/1 unassigned Up Up default GigabitEthernet0/0/0/2 unassigned Up Up default GigabitEthernet0/0/0/3 unassigned Up Up default GigabitEthernet0/0/0/4 unassigned Up Up default GigabitEthernet0/0/0/5 unassigned Up Up default GigabitEthernet0/0/0/6 unassigned Up Up default GigabitEthernet0/0/0/7 unassigned Up Up default GigabitEthernet0/0/0/8 unassigned Up Up default GigabitEthernet0/0/0/9 unassigned Up Up default GigabitEthernet0/0/0/10 unassigned Up Up default GigabitEthernet0/0/0/11 unassigned Up Up default GigabitEthernet0/0/0/12 unassigned Up Up default GigabitEthernet0/0/0/13 unassigned Up Up default GigabitEthernet0/0/0/14 unassigned Up Up default GigabitEthernet0/0/0/15 unassigned Up Up default GigabitEthernet0/0/0/16 unassigned Up Up default GigabitEthernet0/0/0/17 unassigned Up Up default GigabitEthernet0/0/0/18 unassigned Up Up default GigabitEthernet0/0/0/19 unassigned Up Up default RP/0/RSP0/CPU0:ios# RP/0/RSP0/CPU0:ios#sh clock Fri Apr 19 18:26:55.068 UTC 18:26:55.359 UTC Fri Apr 19 2019 RP/0/RSP0/CPU0:ios#
Product Overview
The Cisco ASR 9000 Series modular line cards provide customers with a flexible solution supporting multiple combinations of Ethernet ports, all in a single slot of the Cisco ASR 9000 Series Aggregation Services Routers. Modular line cards support a wide range of interfaces and densities offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco ASR 9000 modular line cards and modular port adapter portfolio continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology.
Using the modular line cards, the Cisco ASR 9000 Series can support customer applications including video-on-demand, Internet Protocol Television (IPTV), point-to-point video, Internet video, and cloud-based computing. These line cards can also be used to deliver economical, scalable, highly available, line-rate Ethernet and IP/Multiprotocol Label Switching (IP/MPLS) edge services. The Cisco ASR 9000 Series line cards and routers are designed to provide the fundamental infrastructure for scalable Carrier Ethernet and IP/MPLS networks, supporting profitable business, residential, and mobile services
Features & Benefits
The Cisco ASR 9000 Series modular line cards are fully compatible with the Cisco ASR 9922, 9010, and 9006 systems, route switch processors (RSPs), and line cards. No hardware upgrade to the chassis or cooling system is required. Total bandwidth is dependent on the number and type of RSPs installed.
The new line cards deliver the ability to mix and match modular port adapters so that customers can customize each slot in the Cisco ASR 9000 to their specific port demands. As an example, a 4-port 10-Gigabit Ethernet modular port adapter can be matched with a 20-port 1-Gigabit Ethernet modular port adapter, all in a single slot.
Each Cisco ASR 9000 Series modular line card provides simultaneous support for both Layer 2 and Layer 3 services and features, helping operators to qualify and stock a single line card that can be deployed in any combination of Layer 2 and Layer 3 applications. These capabilities help to reduce capital expenditures (CapEx) and operating expenses (OpEx), as well as reduce the time required to develop and deploy new services. The Cisco modular line cards set a new standard for service density, allowing operators to offer predictable, managed transport services while optimizing the use of network assets.
The line cards, with their synchronization circuitry and dedicated backplane timing traces for accessing the RSP’s Stratum-3 subsystem, provide standards-based line-interface functions for delivering and deriving transport-class network timing, allowing support of network-synchronized services and applications such as mobile backhaul and time-division multiplexing (TDM) migration. Coupled with the Cisco RSP-440 route switch processor, the line cards can also be used for applications requiring IEEE 1588v2 synchronization services. Recognizing that real-time media dominate next-generation services, Cisco has integrated media-monitoring technology into the Cisco Modular line cards. This multimedia technology allows real-time monitoring and statistics collection of real-time video and voice flows, facilitating proactive maintenance and management of today’s interactive services.
Addressing the advantages of consolidating IP and dense wavelength-division multiplexing (DWDM) networking, G.709 with Advanced Forward Error Correction (FEC) is provided. G.709 provides visibility into the DWDM transmission system to permit rapid detection and recovery from transmission-layer and DWDM impairments. G.709 can also be configured for proactive protection if signal degradation is detected; it prevents traffic loss and link outage. Advanced FEC extends transmission-layer performance, delivering extended performance over an amplified system without the cost of regeneration or transponders.
A9K-MOD160-TR
ASR 9000 Mod160 Modular Line Card, Packet Transport Optimized, requires modular port adapters