Commercial Wet Vacuum with Pre-Separator 4 Coring, Saw Cutting, and Grinding

Description

Call Contractors Store about Free Shipping
. Most States are Free Shipping.
Ermator W2000/2 Slurry Vacuum w/ Pre-Separator - Wet - 2 HP, 120V.
Perfect for coring, saw cutting, and grinding.
A slurry vacuum that extracts the slurry and filters the liquid into usable cleaner water. Then with its high pressure oil cooled pump, you can either re-use the water by pumping back to your tool, or to a containment tank to dispose of later.
Today dust control is crucial. When grinding, cutting or coring sometimes water must be used. Our wet vacuum systems are the best. The W2000/2 is ideal to reduce the water consumption dramatically! When cutting the used water that is pumped to the saw is extracted and then put through the pre separation tank, moves through the main tank filter bag and screen. It is then pumped back to saw to be reused. This saves costly hauling of water and disposal of slurry and water. A slurry vacuum that extracts the slurry and filters the liquid into usable cleaner water. Then with its high pressure oil cooled pump, you can
either reuse the water by pumping back to your tool, or to a containment tank to dispose of
later.
Features:
Stainless steel construction.
Pre separator with metal screen filter.
70 gallon per minute discharge.
Closed circuit usage with continous liquid flow.
Float for auto shut-off to protect motor.
Automatic water level control and drainage.
Optional woven bag for fine filtration.
Complete with all hoses and wand.
Specifications:
Motor Effect (W):
1 x 1300.
Weight:
143.3 lbs.
Suciton Cpaacity (m3/h):
160.
Pump (W):
650.
Pump Capacity (gal/min):
68.68
Filter/Float
:
No/Yes.
CFM:
118.
Waterlift Vacuum/Pump:
90"/30' max.
Pump Discharge:
70 gal./min.
HP:
2
Amps:
9.6
Volts:
120.
Warranty:
36 month.
Payment also can be made over the phone via Visa, MasterCard, American Express or Discover by calling Contractors Store.