Meta-Aramid (Nomex) Sublimation Felt (14" x 16")

Description

Nomex Sublimation Felt is used with sublimating ceramic tiles and other items with beveled edges or irregular surfaces. The ½” thick heat resistant pad cushions tiles and other irregular surfaces to allow the transfer to wrap tightly around the beveled edges without wrinkling. This also greatly reduces wear of the rubber lower platen from repeated presses during sublimation. Recommended to place felt on lower platen then place tile face down with vinyl transfer between and heat from back side of tile. This allows for even distribution of weight and allows for transfer to follow beveled edges. Use a PTFE (Teflon) cover sheet to avoid scratching or transfer of ink. Adjust heat press pressure to avoid excess pressure.
For effective transfer printing onto beveled edges and irregular surfaces
High temperature resistance up to 400° F
Works with sublimation of materials such as: ceramic tiles, light switch plates, ornaments, glass cutting boards, sublislate
Reduces wear of Lower rubber platen.
Place the Nomex® felt on the bottom rubber platen
Directions:
Place the Nomex felt on the bottom rubber platen
Place the sublimation transfer on the felt (face-up)
Center the tile on the transfer image (face-down)
Place a Teflon (PTFE) sheet on the back side of the tile to avoid scratching the upper platen