-40%
Setra Pressure Transducer DPT230 Series DPT2300-010D 0-10 PSID
$ 42.21
- Description
- Size Guide
Description
This is a new Setra Pressure Transducer DPT230 Series DPT2300-010D0-10 PSID 9-30 VDC .05-5.05 VDC Output
DPT230 Series Information
NEMA 4/IP65 Rating
3-Valve Manifold Assembly
High Accuracy
Low Cost
Fast Response
Gas and Liquid Compatible
Low Differential Ranges
Low Line Pressure Effect
No Liquid Fill Diaphragms
Setra Systems Model 230 is a high output, low differential pressure transducer designed for wet to wet differential pressure measurements of liquids or gases. A fast
-
response capacitance sensor and signal conditioned electronic circuitry provide a highly accurate, linear analog output proportional to pressure. Both unidirectional and bidirectional pressure ranges are available for applications with line pressure up to 250 psig. A unique isolation system transmits the motion of the differential pressure sensing diaphragm from the high line pressure environment (e.g. corrosive liquids) to the dry (air) enclosure where it moves one of a pair of capacitance plates proportionally to the diaphragm movement. All parts exposed to the pressure media are stainless steel and elastomer seals. The 230 has a NEMA 4/IP65 rated package to withstand environmental effects. This system responds to pressure changes approximately 20 times faster than conventional fluid
-
filled transducers. The electronic circuit linearizes output vs. pressure and compensates for thermal effects of the sensor. The Model 230 can be supplied with a 3
-
valve manifold assembly (ordered as Pressure Fitting Code V) to protect against excessive differential overpressure, which may occur during installation, start
-
up or shut
-
down. The 230 bleed ports allow for total elimination of air in the line and pressure cavities. The manifold’s rugged, yet compact, construction requires minimum space for installation. If the Model 230 is ordered with the 3
-
valve manifold, the system is shipped completely assembled and ready for wall or pipe mounting.
Specifications
Item Number:
DPT2300-010D
Brand: Johnson Controls
Item Category: Transducers
Subcategory: Pressure Transducers
Series: DPT230
Pressure Range (Gauge): 0~10 psi
Max Pressure (Gauge): 10 psi
Type: Differential
Input: 9~30 VDC
Output: 0~5 VDC
Electrical Connection: 4-Pole Terminal Strip with 7/8 NPT Conduit Connector
Pressure Connection: 1/4-18 NPT Male
Enclosure Rating: IP65;NEMA 4
Temperature Range: 0 to 175 Degrees F
H x W x D: 3.05 in x 3.01 in x 2.15 in
Net Weight: 14.4 oz
Gross Weight: 14.4 oz
Total Parts will guarantee you're totally happy with your purchase!
14 Day Return Policy if merchandise is in unused condition.
We promise to ship your merchandise fast!
We promise to send you tracking information immediately when shipped!
We promise to respond to your questions and concerns!
If you have any questions, concerns or suggestions please contact us through the eBay messaging system.
Please take a moment to see our current specials on eBay
our other eBay listings
.
Powered by SixBit's eCommerce Solution