Townshend Audio Seismic Isolation Pods "C" / Feet for Audio HiFi (Set of 4)

Description

Townshend Audio Seismic Isolation Pods "C" / Feet for Audio HiFi (Set of 4).
Positioned under any piece of equipment, Seismic Isolation Pods will dramatically improve the sound by breaking the acoustic connection between the audio system and structural vibrations in the room.
Specifications:
•
Eliminates structure-borne feedback between speaker and vibration sensitive equipment.
•
Enhances clarity throughout the whole frequency range.
•
Improves bass definition.
•
Produces a wider and deeper sound stage.
•
Neighbour friendly high level listening.
• Diameter of the upper support part 37.0 mm
• Diameter of the bottom support part 69.0 mm
• The minimum height of the vibration isolator without load is 69.0 mm
• Vibration isolator weight 0.18 kg
• Recommended load on a set of 4 supports up to 52.4 kg
• Suitable for Amplifiers, CD, DVD Players, DACs, Pre-amps, Turntables, Speakers, AV Receivers etc.
•
Made in the United Kingdom
Seismic pods, to isolate virtually any hi-fi component for vibration.
The Seismic Isolation Pod is a Seismic Load Cell™ with a circular foot attached to the lower end cap for stability. The length may be adjusted by turning the top end cap, which allows easy levelling of audio equipment placed on a set of four Pods. There is a soft felt protective piece on the top and bottom faces of the end caps to allow for easy positioning and to prevent scratching.
Each Seismic Pod is screw adjustable in height to allow for out of balance loads where the centre of gravity of the component is not near its geometrical centre. When using four (4) type "C" Pods, the maximum supported weight should be equal or less than 52.4 Kg
Package include 4 x
Seismic Isolation Pods "C"
Comes exactly as seen in the photo.
PLEASE READ THE FOLLOWING CAREFULLY BEFORE PURCHASING:
DUE TO THE PANDEMIC COVID THERE MAY BE DELAYS IN DELIVERY OF ITEMS! BUY THIS ONLY IF YOU AGREE THAT YOU MAY NEED TO WAIT LONGER THAN USUAL FOR THE DELIVERY.